PRODUCTS

MMX Moduarl Muliplex Sytem
MMX IO Node Controller
MMX Pump Governor
MMX Keyboard
MMX Keyboard 2
MMX LCD Display 7.0" EN
MMX LCD Display 7.0"
MMX LCD Display 4.3" EN
MMX Tank Level Gauge
MMX Tank Level Indicator

FOAMJET
FOAMJET HP12E
FOAMJET 12E
FOAMJET 25E
FOAMJET 40E
FOAMJET 140-820M
FOAMJET TWIN PUMP SYSTEM

TANK LEVEL GAUGES (TLG)
TLG08
TLG20D
TLG4DL
TLG RTS
TLG RTS-AU
TLG NTS

PUMP CONTROL UNIT

DIGITAL PRESSURE INDICATOR
• BAR
• kPa

S&L MONITOR
PTO TIMER
FLASHER
PRESSURE SENSORS

master control unit - MCU

 

The Master Control Unit - MCU is divided into a few functioning sets: PUMP ENGAGEMENT (PTO), PROGRAMMABLE and ILLUMINATED KEYS, INFO DISPLAY AND WARNING LIGHTS, RPM MANAGING SET, WATER AND FOAM TANK LEVEL GAUGE and DIGITAL PRESSURE INDICATORS.

The MCU has available 14 factory-programmable keys that can act as switches or push buttons. Keys can be assigned different color-coded symbols such as pictograms or colors.

The MCU can power up to 29 digital outputs (MOSFET), which are individually protected by a thermal reversible fuse (0,7 A) and 4 relay outputs (1 A). There are also available eight conditional inputs, protected with optocouplers which may be connected to the positive or negative voltage.

The Pressure Governor allows automated regulation of the engine RPMs according to the pressure fluctuations in the pump, which ensures a constant water flow at the nozzle regardless of the number of connected users.

The automatic pressure regulation is turned ON by turning the rotation switch - encoder . This will cause the pressure to increase to 4 bars. The pressure can subsequently be adjusted to the desired value using the encoder in 1 bar increments. If the manual keys for manual control of the RPMs (pressure) are used while the automatic regulation is running, the automatic regulation will be turned off. The pressure can then be increased and decreased manually or set to automatic again by turning the encoder.

 

       
  DIMENSIONS specifications ordering informations